This a popular skinning knife with a blade designed specifically for the job, it is a well balanced knife with an excellent D2 tool steel blade by Enzo of Finland. The steel is almost a stainless due to it's high chromium content, however it takes an edge more akin to a carbon steel blade without being to difficult to sharpen.

Fitted with Dymondwood scales that are impervious to water the whole knife construction is sealed with 2 tonne epoxy glue rendering it suitable for dressing game that is to enter the human food chain.

The Wodcock is supplied with a leather sheath, presentation box & Certificate of Authenticity.

This Partridge Knife is built on an Enzo (Finland) D2 tool steel blade (almost a stainless steel due to it's high chromium content) mated to Ivory substitute scales with red liners, fitted with a decorative lanyard tube & heavy brass bolsters.

As with all my Partridge knives this is a very substantial knife well suited to the rigours of stalking & game dressing activities, the blade will take a wonderfull edge & hold it for a long time. Even after dressing two deer with one of these blades, cutting through bone etc a couple of strokes on a ceramic hone restored the edge to shaving quality! 

A lifetime purchase one to pass on to your son in the future, finished to a high standard, supplied with a leather sheath, presentation box & Certificate of Authenticity.

SOLD

This Partridge grade knife is built on an 01 Carbon steel Enzo blade, features solid brass bolsters, Dymonwood scales & brass lanyard tube.

The knife is built to the same exacting standards that I apply to all my knives, it would make an ideal knife for the stalker or rough shooter, the 01 Carbon blade is easy to sharpen to a fine edge which it will hold throughout considerable use.

It would also be suitable for thos engaged in Bushcraft activities the 01 steel being exactly the same as that used in the Ray Mears version.

The knife is supplied with a leather sheath, presentation box & Certificate of Authenticity.

SOLD

Eagle Grade knife with 235 layer Damascus blade fully 4mm thick, fitted with heavy brass bolsters, dyed & stabilised burr Elder root (Red & Yellow), jewelled rivets & decorative lanyard tube.

This is a manfull knife quite capable of dressing the largest game annimals here in Europe or the African plain, a joy to behold & to use, this is a once in a lifetime knife to pass on to your son when you're  done with it

Supplied with a leather sheath (custom designs available), presentation box & Certificate of Authenticity.

SOLD

Eagle Grade knife with 235 layer Damascus blade fully 4mm thick, fitted with heavy brass bolsters, dyed & stabilised burr Elder root (Black & Gold), jewelled rivets & decorative lanyard tube.

This is a manfull knife quite capable of dressing the largest game annimals here in Europe or the African plain, a joy to behold & to use, this is a once in a lifetime knife to pass on to your son when you're  done with it

Supplied with a leather sheath (custom designs available), presentation box & Certificate of Authenticity.

Tiger is a breakaway for me, it is based on a Linder Solingen stainless steel blade with polypropylene scales. Not a large knife at  187mm (7.7 inches) overall with a blade of 86 mm ( 3.5 inches)  length, the blade is substantial at 4 mm thick.

This very attractive knife is of sturdy build & more than adequate for any job on the hill or forest.

Note, this knife is sterilisable & can legally be used for dressing game that is to enter the human food chain.

Knife 120 The Peregrine Custom Grade,  SOLD

A gorgeous Arduous Enterprises 235 layer Damascus blade, well over 4mm thick, mated to Royal Jacaranda Dymondwood (Trademark) scales with a red Coral spacer, solid brass bolsters & brass rivets.

As you might imagine this is a heavy knife which just feels so right in the hand, it would be at home anywhere, from the Scottish highlands to the African veldt, just  a pure indulgent pleasure to own!!

These knives are one off's but a similar knife can be created to order, specials featuring exotic materials can be ordered at any time costs will vary accordingly.

A Mora of Sweden blade fairly long & thin but razor sharp, mated with Rosewood & Burgundy Dymondwood (Trademark) scales, brass bolsters & rivets, a really nice handle shape makes this a joy to handle.

Probably the ideal boning knife for use on game or deer carcases, a very practial knife at home in the field or the butchery table.

The Dymondwood (Trademark) scales with their 1% absorption of water in 24 hours total immersion means that you can sterilise the knife & legally use it for the dressing of game in the field.

The knife comes with a certificate of authenticity, sharpening instructions & a hand crafted leather sheath.

Dimensions

Blade length  109 mm

Blade width 20 mm

Blade thickness 3mm approx

Overall length 219 mm.

Please see the Gallery page for more detailed photo's of this knife.

SOLD

This is a superb Cudeman Spanish 440 Stainless blade with gut hook, fitted with Aluminium bolsters, rivets & lanyard tube, with Cocobolo & Maccassar Ebony laminated Dymondwood (Trademark) scales.

This is quite a large knife well capable of dealing with large game, whether slicing or gralloching this is a powerful knife with the capability to deal with these tasks with ease.

Note, this knife is sterilisable & can legally be used for dressing game that is to enter the human food chain.

The knife is beautifully finished & sits well in the hand, a first for me, I hadn't made a gut hook knife until this lovely blade came along.

Dimensions 

Blade length 130 mm

Blade width 33 mm

Blade thickness 4 mm

Knife overall length 242 mm

The knife comes with a hand crafted leather sheath, certificate of authenticity & sharpening instructions. 

Please see the Gallery page for more detailed photo's of this knife.

This is a gorgeous Enzo D2 Stainless blade mated with Rosewood & Burgundy Dymondwood (Trademark) scales, brass bolsters, rivets & lanyard fittings.

Note, this knife is sterilisable & can legally be used for dressing game that is to enter the human food chain.

It has made up into a really well balanced knife strong & sharp capable of any task in the field, plus being a pleasure to own!

This won't dissapoint even the most avid collector the blade, fittings & scales have made a knife of meaningful proportions, a pleasure just to handle & look at!

Dimensions,

Blade length 98mm

Blade width 25.5 mm

Blade thicknes 3.5mm approx

Overall length 205 mm

Comes with a hand crafted leather sheath, certificate of Authenticity, & sharpening instructions.

Please see the Gallery page for more detailed photo's of this knife.

SOLD

Another beautiful 235 layer Damascus blade matched with unusal scales of dyed & stabilized Burr Alder Root, with red liners & brass furniture this 4mm thick Damascus bladed knife is a stunning sight.

High quality damascus steel makes this a very rigid & strong blade which takes & holds a wonderful edge, at home in the Highlands or deep in Africa this is a lifetime knife, possibly to keep in a collectors cabinet & pass on to your son when the time is right, or to use & enjoy!

Dimensions

Length Blade 97mm

Length Overall 207 mm

Blade width 26mm

Blade thickness 4 mm

Comes with a handcrafted leather sheath, certificate of authenticity & sharpening instructions.

Please see the Gallery page for more detailed photo's of this knife.

SOLD

SOLD

Knife 110, a collectors/custom grade knife hand crafted using the finest materials, many hours have gone into this knife, resulting in a knife to be proud of.

This is a one off, the AE Damascus blade in raindrop pattern is outstanding, it's 4mm thick, the Damascus steel extending right through the handle. The blade is fitted with heavy brass bolsters cut & fitted entirely by hand, these are mated to the most beautiful dyed stabilized Burr Alder root I have ever seen. Yes this really is wood, it's difficult to beleive but nature does produce some wonderful materials.

The blade is razor sharp & very strong, this knife will be at home anywhere in the world, from the collectors cabinet to the African veldt. One to pass down to your son in later years.

The knife will be supplied with a hand crafted leather sheath, Certificate of Authenticity & sharpening instructions.

To see more of this knife visit the Gallery & look for Knife 110

Knife 109 A well shaped Cudemann Spanish 440 stainless blade, ideal for skinning, mated with dyed (Mahoganny) Camel bone scales, green liners & 2 brass rivets, this is a stylish knife that sits wonderfully in the hand.

The hollow ground blade takes & holds a wonderful edge, an all round working knife designed for a lifetime of use.

Supplied with a hand crafted leather sheath, certificate of Authenticity & sharpening instructions.

To see more of this knife visit the Gallery & look for knife 109.

Special offer!! SOLD

Your chance to own a genuine John Patrick Knife at a Knockdown price, this is one of my earlier knives & is not quite perfect, see if you can spot the mistake in the gallery?

I'll tell you  the brass bolsters do not quite match. Apart from that the knife is perfect.

The blade is a Frosts of Sweden stainless steel, is razor sharp as you'd expect, the scales are Red/Black Dymondwood (Trademark) which is a resin impregnated timber lamination.This stuff is very tough & has the benefit of being impervious to water, the scales are mounted using a 2 ton epoxy resin & brass rivets, designed to last a lifetime.

This Knife would normally sell for a lot more, apart from the small inconsistency is in every other respect perfect.

To see more of this knife see 105 in the gallery.

SOLD

A two finger knife, an American stainless damascus blade from Snakeriver, Firestorm pattern, this is a delightful little knife, supplied in a small leather hand crafted pouch this razor sharp knife can be carried by the gentleman or the lady as an everday accessory. Small with blue liners the dyed Camel bone scales are fixed with two brass rivets & glued using a  2 tonne rated epoxy, it will last a life time.

If your stuck in the field it would just about deal with the odd roe deer if you had nothing else to hand, I have personally used an even smaller knife on one occasion, when my ageing brain let me down.

See the Gallery for more pictures of this knife.

Knife 102, features a Frosts of Mora, Sweden, stainless steel blade with a Scandi grind, fitted with sturdy solid brass bolsters & Cocobolo (Dymondwood) Trademark, scales.

Dymond wood is a laminated material impregnated with resins that make it impervious to water, sweat etc.

The Frost blade is extremely sharp & of high quality stainless steel, it takes a superb shaving edge & holds long after many a blade has given up. Not a long bladed knife but more than big enough for use on Uk game, Deer etc, certainly a knife to be proud off & one to pass on to your son when the time is right.

Comes with a hand crafted leather sheath, certificate of authenticity & sharpening instructions.

Se the Gallery pages for more detailed photo's.

SOLD

Knife 101, an American stainless Damascus blade (235 layers) with a thinned but not sharpened back edge, overall length 7.5 inches (approx) 0.120 inch thick (3mm) full tang extending through the handle.

Mated with dyed Camel bone scales (Navy Blue), blue liners & brass rivets.

Go to the Gallery to see more pictures of Knife 101.

This knife would be at home on the Highland slopes or the African veldt, it is extremely strong & will last it's owner a lifetime.